NEW 1,200W Automatic Rain Water Tank Pump Garden with Mains Change Over Switch!

$465.00
In Stock


Calculate Shipping

The pump and mains backup switch is an automatic device used for rainwater harvesting systems. It is a fully automatic device that has the ability to detect the level of water inside the tank so it can ensure a seamless supply of water to the home


Fully Automatic Mains Backup Switch with 1,200 Watt Stainless Steel Pressure Pump

Introduction

The pump and mains backup switch is an automatic device used for rainwater harvesting systems. It is a fully automatic device that has the ability to detect the level of water inside the tank so it can ensure a seamless supply of water to the home without any interruption. When the tank is filled during rainfall, Mains Backup Switch detects the level of water in the tank rising off the bottom, and automatically diverts all demands on the system to be supplied with the available rainwater. When the water level in the tank falls below a specified level, the Mains Backup Switch seamlessly switches all demands on the system over to mains water temporarily, to ensure that supply is not interrupted. This ensures that supply of water in never interrupted, and that your customer is maximising their use of rainwater and therefore maximising their savings!

It will optimize collected rainwater, when available and default to a mains water source if tank water is not available or should there be a pump or power failure. When the water level inside your rainwater tank gets too low the switch detects loss in the pressure pump and converts to mains water supply.

 

Frequently asked Questions?

Does this include the pump and mains changeover switch?

YES, this is a complete package including the pump and switch

What happens when my tank is empty?

It automatically senses there is no water in the tank and switches to mains water.
 

What type of warranty conditions apply to Switch?

2 year warranty.
 

Is it easy to install?

 

Unit is quite easy to install but needs to be installed by a plumber.

Applications

  • Water Gardening, Irrigation, Washing Cars and Boats

Product Benefits

  • Automatically switches between rain water tank and mains water
  • Outstanding water savings
  • Save $$$ money on your water bills

Connection and Fittings

  • Pipe and Fittings not supplied

Mains Switch Product Features

  • Pump back flow protection built in, Senses pressure drops
  • No moving parts in the mains switch, meaning less leakage points. The water course is part of the casing.

Pump features

  • Power Supply: 230 Volt / 50Hz / Single Phase
  • HEAD PRESSURE: 450kPA
  • LARGE FLOW: 3,800 litres per hour
  • Powerful 1.5hp (1,200 Watt) motor with thermal overload
  • Australian Approved SAA electrical plug (No wiring or electrician required - just plug it in)
  • Australian EMC compliant product
  • Mechanical Seal: Premium Quality
  • Shaft: Premium Quality
  • Inlet / Outlet: 25mm / 25mm Standard BSP Thread
  • Revolution: 2850 rpm

(547-S1200Rainsaver)

Mains Switch Product Features

  • Pump back flow protection built in, Senses pressure drops
  • No moving parts in the mains switch, meaning less leakage points. The water course is part of the casing.

Pump features

  • Power Supply: 230 Volt / 50Hz / Single Phase
  • HEAD PRESSURE: 450kPA
  • LARGE FLOW: 3,800 litres per hour
  • Powerful 1.5hp (1,200 Watt) motor with thermal overload
  • Australian Approved SAA electrical plug (No wiring or electrician required - just plug it in)
  • Australian EMC compliant product
  • Mechanical Seal: Premium Quality
  • Shaft: Premium Quality
  • Inlet / Outlet: 25mm / 25mm Standard BSP Thread
  • Revolution: 2850 rpm

Mains Switch Product Features

  • Pump back flow protection built in, Senses pressure drops
  • No moving parts in the mains switch, meaning less leakage points. The water course is part of the casing.

Pump features

  • Power Supply: 230 Volt / 50Hz / Single Phase
  • HEAD PRESSURE: 450kPA
  • LARGE FLOW: 3,800 litres per hour
  • Powerful 1.5hp (1,200 Watt) motor with thermal overload
  • Australian Approved SAA electrical plug (No wiring or electrician required - just plug it in)
  • Australian EMC compliant product
  • Mechanical Seal: Premium Quality
  • Shaft: Premium Quality
  • Inlet / Outlet: 25mm / 25mm Standard BSP Thread
  • Revolution: 2850 rpm
SKU 547-S1200Rainsaver
Brand KASA
Shipping Weight 12.0000kg
Shipping Width 0.530m
Shipping Height 0.260m
Shipping Length 0.220m
Shipping Cubic 0.030316000m3

90 days warranty will apply to all our products unless the corresponding listing states otherwise. 
If items show symptoms of operational failure, are defective or are broken (a.k.a. “DOA” or Dead on Arrival), buyers must contact us via eBay message within 7 days with a full and detailed description of the issue. We reserve the right to reject any claims made after 7 days for DOA cases. 
If the product is assessed to be DOA, buyers will receive a full or partial refund, or a replacement product or parts. If buyers are requested to send back defective items, a replacement will be sent to buyers after we receive the returned product back in our warehouse. Such returned products will become our property and the replacement will be the buyer’s property. Return freight costs are at buyers expensive.
Replacement products are provided with the same warranty as the returned products. We are not liable for items that have been misused, mishandled or incorrectly installed. Buyers should read the instruction and advise given by manufacturers and suppliers before use. 
All accessories and bonus gifts (such as carry bags, cables and batteries) are not covered by the warranty.

Be The First To Review This Product!

Help other KASA Factory users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


44% OFF RRP $695.00

More From This Category